# Change The Bands In Your Anytone Codeplug

If you can’t change the band edges on your Anytone radio change the band setting in the codeplug so it matches.

Press and hold down PTT and 1 while turning on your radio to change the bands on your Anytone handheld (tested on my D878UV+). To change them, turn the channel knob and power the radio off when it is showing you the setting that you want.

But I’ve read that some people were not able to change their bands – mostly users of mobile radios. In this conversation Arnold, OE1IAH shared his work-around for this.

He just changed the 17th byte in the codeplug file so the bands in the codeplug matched the bands used on the radio.

This is the way I changed this byte:

printf '\x03' | dd of=codeplug.rdt bs=1 seek=17 count=1 conv=notrunc


I work on a Macbook, so a Terminal App is not too far away ;-)

## Why would you need this?

In austria many of us use the website ham-dmr.at. The codeplug for a Anytone radio had the bands set to 0 while some OMs could not change the bands on their radios so the CPS did not let them write the codeplug to the radio.

With this method you can change the bands in the codeplug so you can write the codeplug to your radio even if you did not change the bands to 0.

## Bands settings

SettingFrequenciesDescription
0136-174 / 400-480Commercial Europe Mode 000000
1136-17d4 / 400-480Commercial US Mode 000001
3144-146 / 430-440Amateur Europe Mode 000003
7144-148 / 420-450Amateur US Mode 000007
8136-174 / 400-470Commercial Mode 000008
10144-148 / 430-450Amateur Australia/Canada Mode 000010
13136-174 / 403-470Commercial Mode 000013
16144-147 / 430-440Amateur Thailand Mode 000016
17136-174 / 430-440Commercial Thailand Mode 000017